Echo PE-280 Manual de usuario descargar pdf (Pagina 19)

Po w e r ed g e r

oP e r a t o r 's Ma n u a l

e x h a u s t s y s t e m

Spark Arrestor Screen

Level 2.

Tools Required: Cross Head Screwdriver, 4mm Hex Wrench, Soft

Metal Brush

Parts Required: Spark Arrestor Screen, Gasket

1. Remove two (2) mufer cover screws and mufer cover (A).

2. Place piston at Top Dead Center (TDC) to prevent carbon/dirt from

entering cylinder.

3. Remove spark arrestor screen (B), gasket (C) and exhaust guide

(D) from mufer body.

4. Clean carbon deposits from mufer components.

NOTE

When cleaning carbon deposit, be careful not to damage the cata-

lytic element inside mufer.

5. Replace screen if it is cracked, plugged or has holes burned

through.

6. Assemble components in reverse order.

IMPORTANT

DO NOT use a metal scraper to remove dirt from the cylinder ns.

5. Use brush to remove dirt from the cylinder ns.

6. Remove grass and leaves from the grid between the recoil starter

and fuel tank.

7. Assemble components in reverse order.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Sin comentarios

Echo PE-280 Manual de usuario Pagina 19