Echo PE-200 Manual de usuario descargar pdf (Pagina 10)

ASSEMBLY

DRIVE

SHAFT/POWER HEAD

Tools Required: 8 x 10 mm Spanner Wrench

Parts Required: Power Head, Drive Shaft Assembly

1. Stand engine on a level surface.

2. Loosen the two bolts (A) at drive shaft end of engine.

3. Carefully fit drive shaft assembly to engine, making sure that

inner drive shaft engages into clutch mount.

NOTE

Rotate the drive shaft housing until edger housing is in line with the

engine.

4. Tighten bolts (A).

THROTTLE LINKAGE

1. Manually pivot throttle rotor (B) clockwise until rotor stops, and

hold in place.

2. Insert throttle cable (C) through adjustment fixture (D).

3. Align slot in carburetor pivot (E) with throttle cable. Large hole in

side of pivot must face away from adjustment fixture.

4. Place cable into slot, and squeeze trigger slowly to seat cable end in

large hole. Release throttle rotor and trigger.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Sin comentarios

Echo PE-200 Manual de usuario Pagina 10