Echo HC-2410 Manual de usuario descargar pdf (Pagina 15)

EDGE

LIPPER

PERATOR

ANUAL

EQUIPMENT CHECK

Before operation a complete check of the unit must be performed;

• Check unit for loose/missing nuts, bolts and screws. Tighten and/or

replace as needed.

• Inspect fuel lines, tank and area around carburetor for fuel leaks. DO

NOT operate unit if leaks are found.

• Never adjust blades when the engine is operating.

• Inspect hand guard for damage. Replace if damaged or missing.

• Check that the blade assembly is firmly attached and in safe operating

condition. Dull, loose or damaged blades should not be used.

4.5 m (15 ft.)

DETERMINE OPERATION AREA

• Before starting the unit, equip yourself and fellow workers in the 4.5 m

(15 ft.) safety zone with the required protective equipment and

clothing.

• Review the area to be trimmed. Look for hazards that could contribute

to unsafe conditions.

• Spectators, children and animals must be prevented from coming

nearer than 4.5 m (15 Ft.) while the Hedge Clipper is in use.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 33 34

Sin comentarios

Echo HC-2410 Manual de usuario Pagina 15